Newbie Problem - impossible to enter numbers in the sub-tracks (Chance, velocity,...)

[kjetil]

You get "30", not "10", when you press "1"?
That is really strange. I have to think about this. Which version of Radium are you using?

[elode]

typing "2" on line 3 :
Result: C#4 + "cd" on line 3, and (why??) "cd" on line 4.

Copie d'écran_20260108_161045.png (8.32 KiB) Viewed 477 times

[kjetil]

EDIT: No forget it. Something else is wrong. I'll look at the code.

Does it make a difference if you set

Code: Select all

setxkbmap -layout "us"

to set english keyboard?

It is not supposed to make a difference since Radium is using scan codes, not localized keys, but I can't think of any reasons why this should happen.

[kjetil]

This is truly weird. Never heard of this before, and I don't see anything wrong in the code.

Have you run radium on the computer before? In case, can you try to temporarily rename the folder "~/.radium" to something else and see if that helps?

Which version of Radium are you running. Have you compiled it yourself?

I might try running the exact linux dist you are using in a virtual machine and see if I can reproduce it? Which version of Manjara are you using?

[kjetil]

Oh, and can you try to run

Code: Select all

setxkbmap -layout "us"

and see if it makes a difference? I'm not so sure it's not related to layout anymore.

[elode]

Change for QZERTY US layout do not change anything. Same result: "30" on line 2.

[elode]

This is truly weird. Never heard of this before, and I don't see anything wrong in the code.

Have you run radium on the computer before? In case, can you try to temporarily rename the folder "~/.radium" to something else and see if that helps?

Which version of Radium are you running. Have you compiled it yourself?

I might try running the exact linux dist you are using in a virtual machine and see if I can reproduce it? Which version of Manjara are you using?

Yes, I have run radium on the computer before, the demo version .aur package "radium.bin". But it doesn’t seem to make a difference. I just used it to explore the interface a bit, without going any further. So, to check, I reinstalled this package by erasing the . radium file and redo the test. No difference with the version I downloaded on your site, version 7.5.76 which is launched using the file run_radium.sh (in the folder radium_64bit_linux-7.5.76).

[elode]

My OS: Manjaro 26.0

[kjetil]

I couldn't reproduce it in Manjaro Plasma 26.0, but can you try this release candidate of 7.5.77?

https://radium.dog/radium_64bit_linux-7.5.77.tar.xz

The bug has not been fixed, but I've inserted some debug output that hopefully will clear up what's happening.
After the program has started, please do the same procedure:

Code: Select all

1. Show velocity text for track 1.
2. Add a note at line 1
3. At line 2, move the cursor to the leftmost velocity subtrack and press the key "1".

In the terminal, the following lines should be printed:

Code: Select all

DEBUG/VELTEXT_keypress: Enter. realline: 1. Place: 1 + 0/1. key: 39
DEBUG/VELTEXT_keypress: subsubtrack: 0
DEBUG/VELTEXT_keypress: Branch 2
DEBUG/DAT_get_newvalue: subsubtrack: 0. Key: 39. default_value: 52428. default_logtype: 0. min_value: 0. max_value: 255. is_hex: 1
DEBUG/DAT_get_newvalue: base: 16. num_subtracks: 2. val: 1. EVENT_1: 39

Hopefully you'll get something else, and then we're closer to finding out what's happening. Crossing fingers.

[elode]

Hello

Here is the result:

Code: Select all

DEBUG/VELTEXT_keypress: Enter. realline: 1. Place: 1 + 0/1. key: 41
DEBUG/VELTEXT_keypress: subsubtrack: 0
DEBUG/VELTEXT_keypress: Branch 2
DEBUG/DAT_get_newvalue: subsubtrack: 0. Key: 41. default_value: 52428. default_logtype: 0. min_value: 0. max_value: 255. is_hex: 1
DEBUG/DAT_get_newvalue: base: 16. num_subtracks: 2. val: 3. EVENT_1: 39